Fosroc Lokfix E45T-300ML Styrene free vinylester resin based cartridge system,for anchoring reinforcement and fixings into a variety of substretes.Extended setting for hot climates

Description 

Lokfix E45T is a two component vinylester anchoring material,supplied in single component catridges with a static mixer nozzlw. When applied it sets and cures rapidly to firmaly secure a variety of steel fixings into concrete and masonery substrates. Two additional grades of lofix vinylester resin are available,selection is based open substrate,installtion temperature and compliance

Uses

For concrete (solid,poros and light),masonry and hollow bricks 

1. Accradited for use in dry , wet and flooded concrete substrates,internal and external exposure
2. Can be used with cracked concrete
3. Fixing of post installed reinforcement and tension anchors
4. Anchoring of threaded rod fixings
5. Can be applied to a  wide variety of fixing and rebar sizes
6. For horizontal , Vertical and overhead application
7. Bonding and surface crack sealing application prior to fosroc Nitofill injection.
8. C1 and C2 seismic resistance  

Advantages

1. High bond strength
2. Extended open time for working in high temperatures or on complex setting configurations.
3. Rapid return to service
4. Can use with a good quality skeleton gun (300ml size), No additional mixing equipment required.
5. Does not apply expansive force to the substrate
6. Enables fixings closer to edges than machanical anchors 
7. Low VOC
8. Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
9. Waterproof, protecting the embedded fixing from corrosion and water penetration into the substrate.

TDS Link : file:///C:/Users/Admin/Downloads/TDS-Lokfix-E45T-India.pdf