BS FloorDense

"Concrete Floor Densification & Liquid Hardener, for Dust Proofing & Polishing"

Description:

• BS FloorDense concrete densifier is a liquid chemical hardener to be applied on top of the concrete floor after the cast floor has cured for a minimum of 21 days.

• It can be left as it is after application or buffed for a mild sheen or even polished for a higher sheen level.

• If polishing has to be done BS FloorDense is to be used after a minimum of 21 days of curing the cast slab. The grinding and polishing process has to be executed to achieved the desired finish

• It doesn’t matter if the concrete floor is polished or not; using BS FloorDense densifier improves strength, abrasion resistance, surface hardness, and service life of the treated concrete floor.

• BS FloorDense works as a micro pore filler in the concrete structure on the top of the floor slab and increases its surface density. After application, BS FloorDense penetrates deeply into the concrete surface, starting a reaction in the pores and creating an insoluble material filling the micro pores in the concrete slab. 

• This process hardens the concrete surface, also reducing the pitting effect.

• BS FloorDense improves the concrete floor durability significantly as compared to an untreated concrete floor.

Advantages:

• These days, a densified concrete floor that is polished to a soft sheen is preferred in commercial buildings such as warehouses, car parks, factories, and other such facilities.
• Added strength and increased hardness in the concrete floor construction lead to better resistance to wear & tear.
• BS FloorDense concrete densifier is an ideal product for doing economical buffed or polished floor surfaces.
• Better light reflectance of the polished floor leads to better ambiance and also a reduction in energy consumption for lighting over larger projects.
• Easy cleaning capability as compared to an untreated concrete floor.
• Reduction in service cost on the maintenance of the concrete floor.

Usage Tips for General Application

• After cleaning the cured concrete floor of loose dust, using water and cleaning machine, leave the floor to dry out for 7 to 8 hours
• Apply BS FloorDense by spreading with rubber wipers.
• Work in the chemical when spreading it by pressing and dragging the liquid on the floor
• Ensure that the floor is fully saturated and no more absorbing the chemical
• Remove any excess liquid with a wiper; do not let the material stagnate/pond on the floor
• After 45 to 50 minutes of treatment, wash off the surface again with water.
• You can use an electrical/wiping machine with water to do the same and clean the treated surface
• Let the surface dry for 7-8 hours
• The surface will gain automatic sheen and reflectance in 25-45 days

Coverage:

One liter of BS FloorDense will cover between 6 to 8 sqm depending on the porosity & absorption of the concrete surface.

Download TDS for BS FloorDense

(Product images are for illustrative purposes only and may differ from the actual product )